How to Assemble

Components:

  1. Water Tank with pump
  2. Water Tank Cover
  3. Light Board
  4. Telescopic Rod
  5. 12 Planting Basket
  6. 24 Seedling Blocks
  7. Nutrient Bottles (A and B)
  8. Power Adapter
  9. 12 Round Covers (plastic domes)

Step-by-Step Instructions:

Important Note: During germination, plants do not require nutrients. Nutrients should be added once the seeds have germinated.

  1. Preparing the Water Tank:
    • Ensure the 4-liter tank is clean and empty.
  2. Connecting the Telescopic Tube to the LED Light:
    • Ensure both the telescopic tube and the LED light are in the correct position.
    • Insert the circular connection of the tube into the LED light.
    • Give a small twist until you hear a click indicating it is securely fastened.
  3. Connecting the Telescopic Tube to the Water Tank:
    • Locate the rectangular connection at the base of the telescopic tube.
    • Insert this connection into the water tank, applying pressure until it is firmly secured.
  4. Placing the Seed Baskets and Sponges:
    • Place a seed sponge inside each of the 12 seed baskets.
    • Insert each seed basket into the holes on the lid of the water tank.
  5. Installing the Germination Domes:
    • Place a plastic germination dome over each seed basket to facilitate germination.
  6. Adding Water to the Tank:
    • Fill the tank with 4 liters of water.
  7. Preparing Nutrients:
    • Fill nutrient bottles A and B with water and shake them until the nutrients are completely dissolved.
  8. Connecting the Power Adapter:
    • Connect the power adapter to the LED light and plug it into a suitable power outlet.
  9. Setting Up the LED Light:
    • Turn on the LED light by pressing the power button.
    • Select the appropriate light mode (seed, growth, bloom) using the switch button.
    • Adjust the light intensity using the Brightness- and Brightness+ buttons.
    • Set the timer by pressing the timer button and then adjusting with the Time +/- buttons.
  10. Automatic Water Pump Configuration:
    • The water pump will automatically turn on and off every 30 minutes.
    • If you need to manually turn the pump on or off, use the corresponding button on the LED light.

Your AquaSoil is now assembled and ready for use.